Supermicro SuperBlade SBA-4114S-T2N Handleiding (100 Pagina's)

Handleiding

20

Chapter 2: Installation and Setup

2.3 Powering Up or Down

Each blade unit may be powered on and o󰀨 independently from the rest of the blades in the

enclosure.

Powering Up a Blade Unit

A blade unit may be powered up in two ways:

• Press the power button on the blade unit.

• Use IPMIView or the browser based management utility to apply power using either a CMM

module, or by the use of the onboard BMC chip in the blade module.

Powering Down a Blade Unit

A blade unit may be powered down in any of the following ways:

• Press the power button on the blade unit.

• Use IPMIView or the browser based management utility to power down; requires Operator

or Admin privileges on the CMM.

• Use SMCIPMItool when connected to the CMM to power down; requires Operator or Admin

privileges on the CMM.

• Use IPMIview or a browser connected to the onboard BMC chip to power down.

• Use SMCIPMItool to use a Command Line Interface to the onboard BMC chip; requires

Operator or Admin privileges.

Bekijk gratis de handleiding van Supermicro SuperBlade SBA-4114S-T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.