Supermicro SuperBlade SBA-4114S-T2N handleiding
Handleiding
Je bekijkt pagina 18 van 100
18
Chapter 2: Installation and Setup
Chapter 2
Installation and Setup
This chapter provides instructions on installing and replacing main system components.
To prevent compatibility issues, only use components that match the specications or part
numbers.
Twenty blade modules may be installed into a blade enclosure, depending upon your
enclosure. Blade modules with Windows and Linux operating systems may be mixed together
in the same blade enclosure.
2.1 Unpacking the System
Inspect the box the system was shipped in and note if it was damaged in any way. If any
equipment appears damaged, please le a damage claim with the carrier who delivered it.
The enclosure should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic elds are generated. It will also require a
grounded AC power outlet nearby. Be sure to read the precautions and considerations noted
in Appendix B.
Bekijk gratis de handleiding van Supermicro SuperBlade SBA-4114S-T2N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | SuperBlade SBA-4114S-T2N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17306 MB |
