Supermicro H14SST-GE handleiding
Handleiding
Je bekijkt pagina 26 van 103
Figure 2-7. Removing the Cap
Installing the Processor into the Frame
1. The processor package is shipped from the factory with the carrier frame pre-
assembled. Grip the handle of the carrier frame/processor assembly from its shipping
tray, and while gripping the handle, align the flanges of the carrier frame onto the rails of
the rail frame so its pins will be at the bottom when the rail frame is lowered later.
2. Slide the carrier frame/processor assembly downwards to the bottom of the rail frame.
Ensure the flanges are secure on the rails as you lower it downwards.
Note: You can only install the processor inside the socket in one direction with the
handle at the top. Make sure that it is properly inserted into the socket before closing
the rail frame plate. If it doesn't close properly, do not force it as it may damage your
processor. Instead, open the rail frame plate again, and double-check that the
processor is aligned properly.
26
H14SST-GE: Component Installation
Bekijk gratis de handleiding van Supermicro H14SST-GE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | H14SST-GE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13111 MB |
