Supermicro Blade SBI-621E-1NE38 handleiding

Niet gecategoriseerd

Supermicro

61 pagina's

PDF beschikbaar

Handleiding

44 45

Chapter 2: Installation and Setup Chapter 2: Installation and Setup

Figure 2-8. BMC Dashboard Screenshot

Hot-Swap for NVMe Drives

Supermicro servers support NVMe surprise hot-swap. For better data security, NVMe orderly

hot-swap is recommended. NVMe drives can be ejected and replaced remotely using the

BMC Dashboard.

Ejecting a Drive

1. BMC Dashboard > Server Health > NVMe SSD

2. Select Device, Group and Slot, and click Eject. After ejecting, the drive Status LED

indicator turns green.

3. Remove the drive.

Note that Device and Group are categorized by the CPLD design architecture.

Slot is the slot number on which the NVMe drives are mounted.

Replacing the Drive

1. Insert the replacement drive.

2. BMC Dashboard > Server Health > NVMe SSD

3. Select Device, Group and slot and click Insert. The drive Status LED indicator ashes

red, then turns o󰀨. The Activity LED turns blue.

Figure 2-9. Installing the Standard Air Shrouds

2.7 System Cooling

Installing the Air Shrouds

Air shrouds concentrate airow to maximize fan e󰀩ciency.

Position the air shrouds as illustrated in the gure below, sliding them over the components.

Note that the front two shrouds each cover only four memory modules, those being the four

outer modules of CPU2. The remaining CPU2 memory modules are uncovered.

Shrouds

Bekijk gratis de handleiding van Supermicro Blade SBI-621E-1NE38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.