Supermicro Blade SBI-621E-1NE38 handleiding

Niet gecategoriseerd

Supermicro

61 pagina's

PDF beschikbaar

Handleiding

42 43

Chapter 2: Installation and Setup Chapter 2: Installation and Setup

Installing Drives

Figure 2-4. Logical Drive Numbers, SBI-621E-1NE34

2.6 Storage Drives

The drives are mounted in tool-less drive carriers that simplify their removal from the chassis.

These carriers also help promote proper airow. Carriers without drives must remain in the

chassis for proper airow.

Note: Enterprise level storage drives are recommended for use in Supermicro systems. For

information on recommended drives, visit the Supermicro website.

Figure 2-5. Logical Drive Numbers, SBI-621E-1NE38

Installing an SSD Drive

1. Align the two front guide holes and pins before sliding the SSD into the tray.

2. Rotate the SSD to clip the holes and pins on the left and right sides of the guide.

3. Insert the drive carrier with the drive into its bay, keeping the carrier oriented so that the

drive is on the top of the carrier and the release button is on the right side. When the

carrier reaches the rear of the bay, the release handle will retract.

4. Push the handle in until it clicks into its locked position.

Removing a Hot-Swap Drive Carrier from the Server

1. Pull the latch on the drive carrier to extend the drive carrier handle.

2. Use the drive carrier handle to pull the drive out of the chassis.

Figure 2-6. Removing an E3.S (1T) Drive Carrier

Figure 2-7. Instaliing the SSD into the Drive Carrier

1 2

Bekijk gratis de handleiding van Supermicro Blade SBI-621E-1NE38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.