Sungrow WiNet-S handleiding
Handleiding
Je bekijkt pagina 40 van 49
Step 1 Set your preferred currency in Unit.
Step 2 Set Feed-in Tariff and Consumption Tariff, and select the Tariff Type.
• Fixed Tariff: Rate charged for electricity consumed at different times of day is fixed.
• Time-of-Use Tariff: You may set different rates for electricity consumed in different time
windows of day. The time windows cannot overlap.
Step 3 Tap Confirm.
--End
By selecting the Reset Revenue checkbox, you can reset the revenue since the
plant was first connected to iSolarCloud.
4.3.2 Reset Login Password
The login password can be reset in two ways: if you are near the module, you can long press
the corresponding button to complete the operation; if you are at a distance, you can perform the
operation remotely via the iSolarCloud App. For specific steps, please refer to 4.3.2.1 Press the
button and 4.3.2.2 On iSolarCloud App (Remotely).
4.3.2.1 Press the button
Step 1 Press and hold the button for over 30s. You will then see the RUN indicator blinking fast.
Step 2 The WiNet password will be reset to default. You can change the password after logging in
again.
NOTICE
Performing a factory reset will reset the settings of relevant WiNet parameters. Please
proceed with caution.
--End
4.3.2.2 On iSolarCloud App (Remotely)
Step 1 Log in to the iSolarCloud App, choose the plant to which the WiNet has been added, and
go to "Device".
Step 2 Select the WiNet-S2 device and tap “Settings”.
Step 3 Choose “Common Parameters”, and set “Reset Login Password” to “Enable”. Then, tap
“Confirm”.
User Mannul
4 Commissioning and Maintenance
34
Bekijk gratis de handleiding van Sungrow WiNet-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | WiNet-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4549 MB |
