Sungrow SG200HX-US handleiding
Handleiding
Je bekijkt pagina 69 van 129
5 Electrical Connection User Manual
step 1 Strip the insulation from each DC cable by 8 mm ~ 10 mm.
step 2
Assemble the cable ends with the crimping pliers.
1: Positive crimp contact
2：
Negative crimp contact
step 3
Lead the cable through the cable gland, and insert the crimp contact into the insulator until it snaps
into place. Gently pull the cable backward to ensure firm connection. Tighten the cable gland and
the insulator (torque 2.5 N.m to 3 N.m).
step 4
Check for polarity correctness.
NOTICE
If the PV polarity is reversed, the inverter will be in a fault or alarm state and will not
operate normally.
- - End
5.7.3 Installing PV Connector
60
Bekijk gratis de handleiding van Sungrow SG200HX-US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG200HX-US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11778 MB |
