Structural Concepts Oasis FSIB4R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

START-UP / THERMOMETER / DISCHARGE AIR PROBES

1. Start-Up

• When case is properly field wired, it will start

operating.

• Supply power will start evaporator coil fans and

the compressor motor.

• From the front of the case, raise the deck pans

and check to see that the evaporator coil fans are

all functioning properly (see next page).

• When the case is in a start up mode (or has been

idle for a long period of time), the unit will require

approximately 30 minutes runtime in order to pull

down temperature.

2. Thermometer

• Thermometer is located at rear plenum for

monitoring warmest air temperature.

• Probe must be used to determine actual product

temperature.

• See illustration below.

3. Discharge Air Probes

• Remove cover to access discharge air probes.

• General illustration of similar model shown below.

• Your model may differ in layout.

Thermometer

Discharge Air

Probe Location

(Behind Plate)

Discharge Air

Probes

Discharge Air

Probe Cover

Discharge Air

Probe Location

(Behind Plate)

--- Discharge Air Probes - Sample Layout ---

Illustration Shown Reflects Remote Unit Only.

It May Not Exactly Reflect Every Feature or

Option of Your Particular Case.

Bekijk gratis de handleiding van Structural Concepts Oasis FSIB4R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.