Structural Concepts Oasis FSIB4R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

Note: Any Revisions Made To

This Sheet Must Also Be Made

To SCC P/N 21-12071.

Adjoinment - Urethane/Silicone Application

>> Warranty is void if improper urethane/sealant is used.

>> Lay generous beads of urethane/sealant as specified.

A. Prior To Adjoinment - Apply Industrial Grade

Urethane at Center of Uprights

• Apply a generous bead (approximately ø3/8”) of

industrial grade urethane at center of uprights

(not-visible to the naked eye).

• Proper urethane application prevents refrigerated air

from escaping between cases (causing condensation

and reducing refrigeration efficiency) as well as

preventing insects from entering case.

• See illustration below.

B. Adjoining Cases - Using Nuts, Bolts and Washers

• Use appropriately sized nuts, bolts and washers for

each hole.

#1 - Holes are accessible by removing honeycomb air

diffuser.

#2 - Holes are accessible at tabs just below honeycomb

air diffuser.

#3 - Holes are accessible at underside of decking. Deck-

ing must be removed to attach bolts/nuts.

#4 - Holes are accessible at tabs just below air intake

grilles.

#5 - Holes are accessible by reaching into opening just

below air intake grilles.

#6 - Holes are accessible at tabs just above air

intake grilles.

• Tighten nuts securely (be careful to NOT

over-tighten)!

• See illustration below.

C. After Adjoinment - Apply Food Grade

Silicone Sealant To Inner Seams

• After all nuts, bolts and washers are

securely attached to case, apply a

generous bead of food grade silicone

sealant to inner seams.

• Decking must be removed to apply sealant

to certain inner seam areas.

• When properly applied, this food grade

silicone sealant will prevent water from

seeping between cases (into the case or

to the floor) as well as crumbs or other

residue from entering between case

seams.

ADJOINING CASES - MODEL FSIB8R SHOWN FOR ILLUSTRATIVE PURPOSES ONLY

Industrial Grade

Urethane Adhesive

(For Refrigeration

Bead Applications)

Silver, Black or Clear

Silicone Sealant

Conforming To NSF/

ANSI 51 Specs

(For Sanitation

Bead Applications)

Inner Silicone

Sanitation Bead

Refrigeration

Urethane Bead

5 5

Bekijk gratis de handleiding van Structural Concepts Oasis FSIB4R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.