Structural Concepts Fusion GMSS1052R handleiding
Handleiding
Je bekijkt pagina 26 van 30
26
TROUBLESHOOTING - CONDENSING SYSTEM*
CONDITION TROUBLESHOOTING
Head Pressure Too High Check that the condensing coil is not dirty or covered.
Check that condensing fans are working.
Check that refrigerant is not overcharged.
Perform sub-cooling check and verify that no contaminates are in system.
Check that close-offs are intact (around condensing coil) and that air is not
recirculate.
Check that store ambient temperature isn’t above maximum allowed.
See OVERVIEW / TYPE / WARNINGS / PRECAUTIONS / WIRING
DIAGRAM section in this manual.
Liquid line filter dryer may be plugged and need to be replaced.
Head Pressure Too Low Check if sight glass is flashing or showing low charge.
Check that suction pressure isn’t too low.
Compressor reed valves may be faulty. Check for high suction pressure /low
head pressure. If pressure is out of range, perform pump down.
*This Service Is To Be Performed By Trained Service Providers Only
Bekijk gratis de handleiding van Structural Concepts Fusion GMSS1052R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Structural Concepts |
| Model | Fusion GMSS1052R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12689 MB |
