Structural Concepts Fusion GMSS1052R handleiding

Niet gecategoriseerd

Structural Concepts

30 pagina's

PDF beschikbaar

Handleiding

TROUBLESHOOTING - GENERAL - PAGE 2 of 2

CONDITION TROUBLESHOOTING

Case Is Not Holding

Temperature

If a large amount of warm product was added to the case, it will take time for

the temperature to adjust. Unit needs product to be pre-chilled.

Check that the discharge air grille is not disrupted or blocked by product.

Check that the case is not in the sun or near a heat or air-conditioning vent.

If case is located near front doors, temperature fluctuation can hinder unit’s

ability to maintain temperature. See OVERVIEW / CONDITION TYPE /

COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING section in this

manual for specifics.

Case Lights Are Not

Working

Check that light switch is in the on position.

LED Lights: Check plugs and lights for proper connection (illustrated below).

Check for burned out bulbs. If so, turn lights off & replace.

Trained Service Providers Only: Check to insure voltage at ballasts. If voltage

is entering but not exiting ballast, ballast is faulty.

No Gap

Gap

LED Light

Plug

LED’s Barrel

Shaped Insert

Bekijk gratis de handleiding van Structural Concepts Fusion GMSS1052R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.