Structural Concepts Fusion GMDSV4D handleiding

Niet gecategoriseerd

Structural Concepts

35 pagina's

PDF beschikbaar

Handleiding

MAINTENANCE FUNDAMENTALS, CONT’D: REAR SLIDING DOORS

8. Rear Sliding Doors

Note: Doors are not interchangeable. There is an

inner and outer door. The outer must be removed

first and replaced last.

• The outer door is the right hand door (from the

service side or rear of case).

• It is identified by a stop located at the lower right

hand corner to the inside of the case.

• Move doors toward the center of the case.

• Individually lift each door up toward the top of the

case; pivot the bottom of the door out.

• Carefully set rear sliding doors down to prevent

them from falling.

• Replace rear sliding doors in reverse order they

were removed.

• Caution! If rear sliding doors become loose,

sloppy or DO NOT stay in their door tracks, they

could fall out causing damage or injury! Bottom

door guides may need to be replaced.

>> See PREVENTIVE MAINTENANCE - TO BE

PERFORMED BY TRAINED SERVICE

PROVIDERS ONLY section in manual for

specifics.

--- Case With Single Set of Rear Sliding Doors ---

Note: Illustration shown may not

exactly reflect every feature or

option of your particular unit.

Bekijk gratis de handleiding van Structural Concepts Fusion GMDSV4D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.