Structural Concepts Fusion GLDSS1243R handleiding

Niet gecategoriseerd

Structural Concepts

38 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: POSITIONING / ALIGNING / FRAME SUPPORT RAILS / LEVELERS

Note: Units shown may not depict an exact representation of your particular unit being installed.

Pry Bar

Base

Frame

Leveler

Adjustable

Wrench

Toe-Kick

1. Position & Align Case Alongside Other Cases

• Before adjusting levelers (or shimming frame

support rails), make certain that the case is in

proper position and, if required, aligned with

adjoining case.

• This may require the repositioning of the case

you are installing or the already positioned

case.

2. Cases With Frame Support Rails: Shim

• Illustration at top right shows case with frame

support rails.

• Shims will be provided with all cases that have

frame support rails.

• Use shims to level case.

• Note: After case is in position, it must be

sealed to floor to prevent entry or leakage

of liquid or moisture.

3. Cases With Levelers: Adjust Levelers

• After case is in position, adjust case so it is level

and plumb (see illustration at right).

• You may need to remove front and/or rear

Toe-Kick to access levelers.

• Use adjustable wrench (and possibly a pry bar)

to adjust leveler.

• Do not use Pry Bar on Toe-Kick as it may

buckle.

• Do not use Pry Bar on End Panel as it may

chip.

• Use Pry Bar ONLY on Base Frame to avoid

damaging case.

• See illustration and photos below and at lower

right.

Frame Support

Rails

Bekijk gratis de handleiding van Structural Concepts Fusion GLDSS1243R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.