Structural Concepts Elevate BD3632IS handleiding

Niet gecategoriseerd

Structural Concepts

28 pagina's

PDF beschikbaar

Handleiding

WARNING! TURN OFF CASE BEFORE PERFORMING PREVENTIVE MAINTENANCE!

QUARTERLY PREVENTIVE MAINTENANCE INSTRUCTIONS, CONT’D

Under Case Cleaning:

Whenever refrigeration assembly is removed from underside of case, vacuum (or broom) under case to

remove all dust, debris and dirt that may collect.

Condensate Package:

Caution! You must turn main power switch off before cleaning!

• Remove front panel. Turn main power switch off and allow components to cool.

• Carefully and slowly slide condensate package out from under case.

• Use a soft-bristled scrub-brush and non-corrosive de-scaling solution (to remove calcium, lime and

rust) from condensate pan. Wipe down courtesy loop. Follow de-scaling solution’s instructions as to

proper dilution and safety precautions.

• After thoroughly cleaning pan with brush and solution, rinse thoroughly with clean water

(in spray bottle) and wipe dry with sponge or paper towel.

• Use moist cloth to wipe off dust & debris that collects on various parts (hot gas loop condensate pan,

compressor fan, blades and housing, fans, sight glass (if any), refrigeration lines, courtesy loop,

overflow pan (if any), etc.

• Slide condensate package back under case.

• Return front panel to case.

• See GENERAL MERCHANDISER ILLUSTRATION - MODEL BD3632IS - PAGE 3 of 4 in this

operating manual for condensate package illustration.

PREVENTIVE MAINTENANCE - TO BE PERFORMED BY TRAINED SERVICE PROVIDERS ONLY - 2 of 2

Bekijk gratis de handleiding van Structural Concepts Elevate BD3632IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.