Structural Concepts Elevate BD3632IS handleiding

Niet gecategoriseerd

Structural Concepts

28 pagina's

PDF beschikbaar

Handleiding

WARNING! TURN OFF CASE BEFORE PERFORMING PREVENTIVE MAINTENANCE!

QUARTERLY PREVENTIVE MAINTENANCE INSTRUCTIONS

Tub, Coil, Drain, Fan Blades, Motors, Brackets:

Caution! Do Not Clean or Perform Service On Unit While It Is Energized!

1. Remove front panel (to access controls). No screw removal is required. Place in safe place away from

foot traffic.

2. Turn off main power switch (located near programmable thermostat).

3. Remove deck pans. Place in safe place away from foot traffic.

4. Disconnect power cord that energized fan panel.

5. Grasp fan shroud assembly. Lift up and away from case. Place in safe place away from foot traffic.

Cleaning Process:

• Use vacuum to remove excessive residue AND to remove dust in coil.

• Use clean cloth and/or nylon brush with warm water and mild soap solution to clean tub, drain, trough,

TXV, lines, solenoid, coil & coil tubes. See enlarged view of components to be cleaned (lower-right).

• Remove debris that may clog drain.

• Wipe down fan blades, motors and brackets with moist cloth. Dry components with paper towel.

Returning Components / Restoring Power To Case:

• Replace/reconnect components in reverse order they were removed or disconnected.

• Turn main power switch back on. Check that fans are operational.

PREVENTIVE MAINTENANCE - TO BE PERFORMED BY TRAINED SERVICE PROVIDERS ONLY - 1 of 2

Enlarged

View Of

Components

To Be

Cleaned

Bekijk gratis de handleiding van Structural Concepts Elevate BD3632IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.