Steinberg SBS-SF-3000 handleiding
Handleiding
Je bekijkt pagina 8 van 39
14 15
30.11.2021
3.3. DEVICE USE
Start the device with the button (21) and wait until the
display shows MENU:
Use the navigation buttons (6) to select the specic options
"Satellite"/"Find"/"Setting"/"Channel"/"Media"/"Upgrade".
To enter the submenu of a given item (icon), press the "OK"
button on the navigation panel.
3.3.1 SATELLITE OPTIONS
(
SATELLITE
)
In the MENU, using the navigation buttons (6), select the
"Satellite" icon - the following interface will appear:
A. Antenna Setting
Using navagation buttons choose „Antenna Setting” to set
antenna parameters.
• Use the up/down navigation buttons (6) to select
the LNB power, LNB frequency 22 KHz, DiSEqC 1.0,
DiSEqC 1.1 etc., and use the right/left navigation
buttons (6) to select the value for the parameter.
• Use the up/down navigation buttons (6) to select
Start Search, and use the left/right buttons to
set the search modes including satellites, blind,
transponders, superblind etc. Press "OK" on the
navigation panel to start searching.
• Press the red F1 button (14) to go to the satellite
list page.
• Press the green F2 button (13) to go to the
transponder list page.
• Use the up/down navigation buttons (6) to select the
satellite, transponder, and use the right/left buttons
(6) to select the selection to set the motor.
• Use the up/down navigation buttons (6) to select
the motor type, then use the right/left buttons (6)
to select DiSEqC 1.2 and USALS and set their specic
values.
• When you have set all the required motor parameters,
select the "Save Position" position, then conrm this
position with the "OK" (6) navigation button in order
to save the current settings.
C. Satellite List
Use navigation buttons (6) to select the "Satellite List" to
access the satellite selection options.
• Use navigation buttons (6) to select the required
• Press the green button F2 (13) to add new satellite by
setting its name, longitude and direction.
• Press the yellow button F3 (12) to modify the existing
satellite, i.e. its name, longitude and direction.
• Press the red button F1 (14) to delete the saved
satellite - press the “OK” navigation button (6) to
conrm deleting the selected satellite, and press
the "EXIT" button (15) to exit this position without
removing the satellite.
• Press the blue button F4 (11) to set satellite search
parameters. Use the up/down navigation buttons (6)
to select modes, free of charge channels only, TV/
radio etc. The scanning mode includes a manual
and an automatic search. If the signal is blocked, the
device will signal it with a quickly repeated sound,
and will signal it accordingly on the signal quality
bar. Meanwhile, the signal lock indicator light (4) will
illuminate
• • Press "1" in the numeric buttons eld (8) to return
to antenna settings.
D. Transponder list (TP List).
Use the navigation buttons (6) to select the "TP List" to
access the transponder setting options.
• In the transponder list menu, use the up/down
navigation buttons (6) to select the required
transponder. The transponder for a given satellite
can also be displayed using the right/left navigation
buttons (6).
• Press the green F2 button (13) to add a new
transponder by setting its frequency, polarization,
data rate and conrm your selection with the "OK"
button (6).
• Press the yellow button F3 (12) to modify the existing
transponders, i.e. their frequency, polarization and
data transfer rate.
• Press the red F1 button (14) to delete the existing
transponder and press the "OK" button (6) to
conrm the deletion. To go back without deleting,
press the "EXIT" button (15).
B. Motor Setting
Select "Motor Setting" using navigation buttons (6) to
enter the motor settings.
• Press the blue F4 button (11) to set the transponder
search (TP Search), and use the up/down navigation
buttons (6) to select only free of charge channels
(FTA Only), TV/Radio etc. After selecting Search,
press the "OK" button (6) to start the search process.
If the signal is blocked, the device will prompt you
on the signal quality bar. Meanwhile, the signal lock
indicator light (4) will illuminate.
3.3.2 SIGNAL FINDING
(
FIND
)
Using the navigation buttons (6) select the "Find" icon in
the MENU, and the following interface will appear on the
screen:
A. Finding
Use the navigation buttons (6) to select "Finding" in order
to enter the search options.
• The display will show C/N, BER, FEC, MER, longitude,
azimuth etc.
• Select Satellite and press “OK” (6), the following
window will pop up. Use the up/down navigation
buttons to select the desired satellite and press "OK"
(6).
EN EN
Bekijk gratis de handleiding van Steinberg SBS-SF-3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-SF-3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9227 MB |
