Steinberg SBS-SF-3000 handleiding
Handleiding
Je bekijkt pagina 9 van 39
16 17
30.11.2021
• Select "LNB Fre", press "OK" (6) and the following
window will appear. Use the up/down navigation
buttons (6) to select the LNB Fre value, and conrm
the selection by pressing "OK" (6).
• In this window you can quickly set the satellite and
transponder parameters.
• If a frequency showing a signal is detected (not yet
locked), it will be appropriately displayed on the
signal strength bar.
• If the signal is blocked, the device signals this on
the signal quality bar. Meanwhile, the signal lock
indicator light (4) will illuminate.
• Press "OK" (6) in the Search option, and the device
will start searching for channels according to the
selected transponders or according to manual
settings. It will automatically switch to the page with
the given program, if a program is found on a given
transponder.
B. Spectrum
Use the navigation buttons (6) to select "Spectrum" in
order to enter the range parameter settings.
• Press "1" in the numeric buttons eld (8) to select the
frequency range (SPAN) area – the default setting is
FULL. The smaller the range, the more accurately the
status of the frequency signal is displayed.
• Press the red F1 button (14) to access the antenna
settings.
• Press the blue button F4 (11) to set the 22K signal.
• Press the yellow button F3 (12) to set the polarity.
• Press the blue button F4 (11) to pause the current
status.
• Use the up/down navigation buttons (6) to set the
vertical position coordinates.
• Select the frequency using left/right navigation
buttons (6). The strength of the selected frequency
will be displayed in the upper right corner of the
screen.
• Pressing "0", "1", "2" buttons on the numeric buttons
eld (8), you signal can set DiSEqC, Span and Sample.
C. Angle Calculation
Use the navigation buttons (6) to select the Angle
Calculation item in order to switch to the angle settings.
• Press the up/down navigation buttons (6) in the
option of a specic satellite, its longitude will be
adjusted accordingly.
• Press the up/down navigation buttons (6) in the
Sat Longitude option to manually enter the satellite
longitude according to your preference.
• When you select the Manual option, you can use
the navigation buttons (6) to set the local latitude
and longitude and enter a given value - pressing the
right/left navigation buttons (6) select the eastern
or western longitude and the southern or northern
hemisphere.
• If a parameter is changed, the result will be
automatically calculated and shown on the display.
D. Constellation
Use the navigation buttons (6) to select the constellation
position in order to enter the constellation setting
parameters interface.
• Use the up/down navigation buttons (6) to select
Analyse by Frequency in order to enter the interface
below
• Press the navigation buttons left/right (6) to select
the desired satellite and the transponder will align
with it.
• Select the transponder by pressing the left/right
navigation buttons (6) and its frequency, data rate
and polarity will be matched automatically.
• When you press the "OK" button (6) the quality and
signal strength bar will be displayed.
• In the frequency analysis interface, press the left/
right navigation buttons (6) to switch between the
frequencies of the selected satellite
• Press the "EXIT" button (15) and use the Up/Down
navigation buttons to select the Analyse by Program,
conrm with the "OK" button (6) to bring up the
above interface.
• In the post-program constellation analysis interface,
press the left/right navigation buttons (6) in order to
switch between all found programs.
• If a frequency with a signal is detected (not yet
locked), it will be appropriately displayed on the
signal strength bar.
• If the signal is locked, the device will communicate it
with the signal lock indicator light (4).
3.3.3 SETTING
Select the "Setting" icon in the MENU using the navigation
buttons to enter the device settings interface.
A. Language settings (Language)
Use the up/down navigation buttons (6) to select and enter
Language , the display will show the following language
options interface: software, subtitles and audio. Select
using navigation buttons: up/down, right/left, "OK" (6).
B. Timer Setting
Use the navigation buttons (6) Timer Setting to set the
time, date and time zone. Select using navigation buttons:
up/down, right/left, "OK" (6).
C. Audio-visual Settings (AV Setting)
Use the navigation buttons (6) to enter "AV Setting" such as
standard, size and TV aspect ratio. Select using navigation
buttons up/down, right/left, "OK" (6).
D. Finder Setting
In this submenu, you can choose whether or not to use
the nder option, i.e. the LED diode (22) on the back of
the device.
EN EN
Bekijk gratis de handleiding van Steinberg SBS-SF-3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-SF-3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9227 MB |
