Steinberg SBS-SF-3000 handleiding
Handleiding
Je bekijkt pagina 7 van 39
12 13
30.11.2021
EN
The product satises the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
TECHNICAL DATA
USER MANUAL
Parameter
description
Parameter value
Product name Sat Meter
Model SBS-SF-3000
Power supply
parameters
input: 230V/50Hz
output: VDC14/2A
Processor [MHz] 600MHz
RAM [Mbit] 512 Mb
Internal storage
[Mbit]
64Mbit
Tuner type DVB-S/DVB-S2
DVB-S2 signal
Frequency
range
950MHz
÷2150MHz
Signal level -65÷-25dBm
Impedance 75Ω
Transponder
data
transmission
rate
1Msps~60Msps
22 kHz signal supported
DiSEqC
1.0;1.1;1.2;1,3
supported
USALS supported
Demodulation
DVB-S
QPSK
Demodulation
DVB-S2
8PSK, 16APSK,
32APSK
Horizontal
polarization
18V
Vertical
polarization
13V
Battery type
12,6 V 2000mAh
Li- poly 12,14 V 2200 mAh
Others
Connector type F
USB Port Present, 2.0
Audio output Present
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
dier from the actual product.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to SAT METER. Do not use in very
humid environments or in the direct vicinity of water tanks.
Prevent the device from getting wet. Risk of electric shock!
Do not cover the ventilation openings!
2.1. ELECTRICAL SAFETY
a) The plug must t the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with a
wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualied electrician or
the manufacturer‘s service centre.
f) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
ammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device o and report it to a
supervisor without delay.
LEGEND
technical data and specications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
d) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f) In case of re, use a powder or carbon dioxide
(CO
2
) re extinguisher (one intended for use on live
electrical devices) to put it out.
g) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h) Keep packaging elements and small assembly parts
in a place not available to children.
i) Keep the device away from children and animals.
2.3. PERSONAL SAFETY
a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
b) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
b) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual.
c) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out
by qualied persons, only using original spare parts.
This will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory-tted guards and do not loosen
any screws.
g) Clean the device regularly to prevent stubborn grime
from accumulating.
h) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
i) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
j) Keep the device away from sources of re and heat.
k) Do not expose the product to mechanical pressure.
l) It is recommended to disconnect the device from the
antenna in the event of lightning storms.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. 3. USE GUIDELINES
The device is designed to measure satellite TV signal
parameters.
The user is liable for any damage resulting from
unintended use of the device.
ATTENTION! This product‘s view can be found on the
last pages of the operating instructions (pp. 73).
3.1. DEVICE DESCRIPTION
EN
1. Display
2. Battery level indicator (o - OK; blinking indicates
the battery is missing or another battery error)
3. Device operation indicator
4. Signal lock indicator (when the device locates the signal)
5. FIND shortcut button
6. Navigation buttons (up, down - switching channels,
left, right - volume change)
7. MENU button
8. Numeric buttons eld
9. Source signal switch
10. MUTE button
11. BLUE button [F4] (optional operations depending on
the selected menu)
12. YELLOW button [F3] (optional operations depending
on the selected menu.) Pressing the button for a
longer time in the playback mode or in the main
menu turns the display o)
13. GREEN button [F2] (optional operations depending
on the selected menu)
14. RED button [F1] (optional operations depending on
the selected menu. Pressing the button for a longer
time in the playback mode or in the main menu turns
the LED backlight on the back of the device on/o)
15. EXIT button
16. SPEC button (spectrum settings)
17. 22K signal indicator
18. Horizontal 18V voltage polarization indicator
19. Vertical 13V voltage indicator
20. DC 14V/2A power socket
21. On/o switch
22. LED
23. Speaker
24. Battery cover
25. RF input
26. USB input
27. HD TV output
28. AV output
29. CVBS TVI CVI AHD input
Device main menu
A. Satellite options (antenna settings, turntable motor
settings, satellite settings, transponder settings)
B. Channel options (edit and list TV and radio channels,
deleting channels, channel guide)
C. Signal search (search, span spectrum, angle
calculator, constellation analyser)
D. Multimedia options (playing les: movies, music,
photos, recording les, managing USB input)
E. Software options (software information, factory
reset, software update, access password)
F. General settings (time setting options, timer,
language, search, AV, security)
G. Battery level indicator.
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
The device should always be used when positioned on an
even, stable, clean, reproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions.. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details on the product label.
Bekijk gratis de handleiding van Steinberg SBS-SF-3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Steinberg |
| Model | SBS-SF-3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9227 MB |
