Steinbach FXS38 handleiding

15 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 15
20 21
040603_V2405 040603_V2405
de de
» Posion the lter system at a sucient distance from the pool wall so that it cannot be used as an entry aid.
» Ensure sucient air exchange to prevent the motor from overheang.
» Do not leave the appliance running dry (without water).
» Never put the appliance or parts of it into the pool.
» Never use occulants for your pool water under any circumstances. Filter Balls can easily clump together
with occulant.
» The lter system is not self-priming and must therefore be installed below the water level.
Unpacking and checking the scope of delivery
WARNING!
Choking hazard due to packaging material!
Catching the head in packaging lm or swallowing other packaging material can lead to death by suocaon.
Especially for children and mentally impaired people, who are unable to assess the risks due to a lack of
knowledge and experience, there is an increased potenal for danger here.
» Ensure that children and mentally impaired people do not play with the packaging material.
Preparaon
Choice of locaon
The following requirements must be met or considered:
» Posion of the device between the sucon connecon and the inlet nozzle and at a sucient distance from
the pool wall so that the device cannot be used as an entry aid
» Posion of the device below the water level
» Maximum distance of three metres from the pool
» Stable, rm and horizontally aligned base, e.g. exposed aggregate concrete slab
Filter sha
A lter sha is required if the pool is parally or completely sunk into the ground in order to be able
to place the appliance below the pool water level.
» Ensure that the lter sha is not ooded and that the surrounding water and rainwater can seep away
easily.
» This can be achieved by rolling a suitable layer of gravel at the boom of the sha. An oponal submersible
pump with oat switch, which is connected to a channel or drain, provides addional protecon for your
lter system against rising water within the sump.
» Ensure sucient natural venlaon of the sump to prevent condensaon.
» Size the lter sha so that work can be carried out on the appliance.
Descripon
Descripon and layout diagram (Figure B) of the solar lter system
The device‘s integrated pump draws in pool water via the lter material and pumps it back into the pool aer
it has been ltered. The lter system is not self-priming and must therefore be installed below the water level.
When operated with the PV panel, the lter system only works when there is sucient sunlight.
The device is equipped with connecons for Ø 32 mm swimming pool hoses.
Filter me
The water in the pool should be circulated at least twice within 24 hours. If the pool is heavily used, it should
be circulated 3 to 5 mes a day.
Inial commissioning
WARNING!
Danger to life due to operaon of the water treatment system while bathing!
Hair or items of clothing can be sucked into the sucon opening of the pool and, in extreme cases, trap people
under water and prevent them from surfacing.
» Never operate water treatment system devices while people are in the pool.
» Prevent all access to the pool while water treatment system devices are in operaon.
NOTE!
Flocculants in the bath water can cause the Filter Balls or Filter Wool Flakes to clump together and severely
impair their cleaning eect.
» Do not use occulants for water treatment if you are using Filter Balls or Filter Wool Flakes as a lter
medium.
Check before commissioning
» The appliance is outside the pool and the power cable is disconnected from the power supply
Assembly
» Assemble the appliance parts as shown in gure A and
the corresponding item numbers..
» Note that the union nut and the connecng elbow
1
are already pre-assembled.
» Moisten the two lower O-Rings
2
with a lile water or
detergent.
» Push the connecon elbow
1
into the threaded cover
4
and ghten the union nut
1
by hand. Do not use
any tools for this as they could damage the union nut!

Bekijk gratis de handleiding van Steinbach FXS38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSteinbach
ModelFXS38
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3704 MB