Standard Horizon HX850S handleiding
Handleiding
Je bekijkt pagina 28 van 88
HX850SPage 28
pears at the upper left of the display during scanning.
7. To stop the scan, press the
[
SCAN
(
DW
)]
key or
[
CLR
(
MEM
)]
key.
6.9.3 PRIORITY SCANNING
(
P-SCAN
)
The “Priority Scan” allows the radio to “Memory Scan” while also keeping watch
on a particularly important “Priority Channel”. In the default setting, Channel
16 is set as the priority channel. You may change the priority channel to the
desire channel from the Channel 16 by the “Radio Setup” menu.
Setting Up the Priority Channel
1. Press and hold the
[
CALL
(
ENT
)
MENU
]
key until the
“
Setup MenuSetup Menu
Setup MenuSetup Menu
Setup Menu” appears.
2. Select “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” with the
[
T
]
/
[
S
]
key, then press
the
[
CALL
(
ENT
)
MENU
]
key.
3. Select “
Priority CHPriority CH
Priority CHPriority CH
Priority CH” with the
[
T
]
/
[
S
]
key, then press
the
[
CALL
(
ENT
)
MENU
]
key.
4. Select the desired channel to be a priority with the
[
T
]
/
[
S
]
key, then press the
[
CALL
(
ENT
)
MENU
]
key to
store the selected setting.
5. Press the
[
16/9
]
key to exit the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu and
return to radio operation mode.
A “ ” icon will appears at the upper left of the display
when the priority channel is recalled.
Operation
1. Select the desired channel to be included in the scan memory using the
[
T
]
or
[
S
]
key.
2. Press and hold the
[
CLR
(
MEM
)]
key until “ ” icon is
shown on the display, thus the current channel is stored
into the transceiver’s scan memory.
3. Repeat steps 1 and 2 for all the channels to be scanned.
4. To delete a channel from the transceiver’s scan memory, select the memo-
rized channel, then press and hold the
[
CLR
(
MEM
)]
key until “ ” is re-
moved from the display.
5. All channels programmed remain in the transceiver's scan memory even if
the power is turned off.
6. To start priority scanning, press the
[
SCAN
(
DW
)]
key.
The scan proceeds from the lowest to the highest pro-
grammed channel and stops scanning when a trans-
mission is received. Scanning will resume when the
incoming signal disappears at the end of the transmission. A “ ” icon
Bekijk gratis de handleiding van Standard Horizon HX850S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX850S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11393 MB |
