Standard Horizon HX850S handleiding
Handleiding
Je bekijkt pagina 27 van 88
Page 27HX850S
6.9 SCANNING
The HX850S allows the user to select the scan type from “memory Scan” or
“Priority Scan”. The “Memory Scan” scans the channels that were programmed
into memory. The “Priority Scan” scans the channels programmed in memory
with the user selected priority channel.
6.9.1 SELECTING THE SCAN TYPE
1. Press and hold the
[
CALL
(
ENT
)
MENU
]
key until the
“
Setup MenuSetup Menu
Setup MenuSetup Menu
Setup Menu” appears.
2. Select “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” with the
[
T
]
/
[
S
]
key, then press
the
[
CALL
(
ENT
)
MENU
]
key.
3. Select “
SCAN TypeSCAN Type
SCAN TypeSCAN Type
SCAN Type” with the
[
T
]
/
[
S
]
key, then press
the
[
CALL
(
ENT
)
MENU
]
key.
4. Select the desired Scan Type (“
Memory ScanMemory Scan
Memory ScanMemory Scan
Memory Scan” or “
Pri-Pri-
Pri-Pri-
Pri-
ority Scanority Scan
ority Scanority Scan
ority Scan”) with the
[
T
]
/
[
S
]
key.
5. Press the
[
CALL
(
ENT
)
MENU
]
key to store the selected
setting.
6. Press the
[
16/9
]
key to exit the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu and
return to radio operation mode.
6.9.2 MEMORY SCANNING
(
M-SCAN
)
The HX850S can be programmed to scan channels from a minimum of 2 chan-
nels up to all channels in the marine band. If an incoming signal is detected on
one of the channels during scan, the radio will pause on that channel, allowing
you to listen to the incoming transmission.
1. Select the desired channel to be included in the scan memory using the
[
T
]
or
[
S
]
key.
2. Press and hold the
[
CLR
(
MEM
)]
key until “ ” icon is
shown on the display, thus the current channel is stored
into the transceiver’s scan memory.
3. Repeat steps 1 and 2 for all the channels to be scanned.
4. To delete a channel from the transceiver’s scan memory, select the memo-
rized channel, then press and hold the
[
CLR
(
MEM
)]
key until “ ” is re-
moved from the display.
5. All channels programmed remain in the transceiver’s scan memory even if
the power is turned off.
6. To start scanning, press the
[
SCAN
(
DW
)]
key. The scan proceeds from the
lowest to the highest programmed channel and stops
scanning when a transmission is received. Scanning
will resume when the incoming signal disappears at
the end of the transmission. A “ ” icon will ap-
Bekijk gratis de handleiding van Standard Horizon HX850S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX850S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11393 MB |
