Standard Horizon HX210 handleiding
Handleiding
Je bekijkt pagina 33 van 52
Page 31
4. Press the [▲] or [▼] key to select the de-
sired level. The beep level can be set from
“1” to “5”, or “OFF”.
5. Press the [ENTER] soft key to store the se-
lected level.
6. Press the [CLR/ ] key to return to radio operation.
9.3.2 BATTERY SAVE
This function allows you to change the battery save mode setting.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT]
soft key.
3. Select “BATTERY SAVE” with the [▲] or [▼] key, then press the [SELECT]
soft key.
4. Press the [▲] or [▼] key to select the de-
sired setting. You can select one from “OFF”,
“50%”, “70%”, “80%”, or “90%”.
5. Press the [ENTER] soft key to store the se-
lected setting.
6. Press the [CLR/ ] key to return to radio operation.
9.3.3 STROBE LED
This selection is used to switch and set the function of the strobe LED.
Emergency
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT]
soft key.
3. Select “STROBE LED” with the [▲] or [▼] key, then press the [SELECT]
soft key.
4. Select “EMERGENCY” with the [▲] or [▼] key, then press the [SELECT]
soft key.
5. Press the [▲] or [▼] key to select the
desired setting. You can select one from
“CONTINIOUS”, “SOS”, “BLINK 1”, “BLINK
2”, or “BLINK 3”.
6. Press the [ENTER] soft key to store the se-
lected setting.
7. Press the [CLR/ ] key to return to radio operation.
Bekijk gratis de handleiding van Standard Horizon HX210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX210 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5060 MB |
