Standard Horizon HX210 handleiding
Handleiding
Je bekijkt pagina 32 van 52
Page 30
9.2.2 EDIT
This selection is used to edit the FM Broadcast frequency and name.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “FM SETUP”, then press the [SELECT]
soft key.
3. Press the [▲] or [▼] key to select “EDIT”, then press the [SELECT] soft
key.
4. Press the [▲] or [▼] key to select the mem-
ory to be edited, then press the [ENTER]
soft key.
5. Use the same procedure as described in steps 4 to 13 of “ADD” in the
previous section.
9.2.3 DELETE
This selection can delete the frequency data stored on an FM Broadcast memory.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “FM SETUP”, then press the [SELECT]
soft key.
3. Press the [▲] or [▼] key to select “DELETE”, then press the [SELECT]
soft key.
4. Press the [▲] or [▼] key to select the mem-
ory to be deleted, then press the [ENTER]
soft key.
The delete conrmation screen will appear.
5. Press the [▲] or [▼] key to select “OK?” (delete) or “CANCEL” (cancel),
then press the [SELECT] soft key.
9.3 CONFIG
9.3.1 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT]
soft key.
3. Select “KEY BEEP” with the [▲] or [▼] key, then press the [SELECT]
soft key.
Bekijk gratis de handleiding van Standard Horizon HX210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX210 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5060 MB |
