Stamos PROLOX 65VO handleiding
Handleiding
Je bekijkt pagina 20 van 167
EN
e) Do not cover the ventilation slots of the device - place the cutter at a distance of 30 cm from
the surrounding objects.
f) The welder must not be held under the arm or close to the body.
g) Do not install the equipment in rooms with aggressive environment, high dustiness, and near
devices with high electromagnetic field emission.
h) Keep fingers, hair and clothing away from the rotating fan.
i) The appliance must be earthed during operation.
j) When the thermal overload LED illuminates during operation of the appliance, stop
operation immediately and wait for the appliance to cool down.
k) When the appliance is used for a long time or with high current, switch off the power supply
only after the appliance has cooled down.
l) Do not switch off the device during welding!
m) Maintain the unit regularly and clean the inside of the unit of dust.
5.2. Connecting the unit
5.2.1. Electrical connection
a) The equipment should be connected by a qualified person. In addition, a person with the
necessary qualifications should check that the earthing and electrical installation including
protection system complies with safety regulations and is functioning properly.
b) Position the equipment near the workplace.
c) To connect the unit, avoid cables that are too long.
d) Single-phase cutting machines should be connected to a socket equipped with a grounding
pin.
e) Cutting machines powered by 3-phase mains are delivered without a plug, you should obtain
such a plug on your own and have the installation performed by a qualified person:
WARNING! In order to claim a warranty or make a claim, it is necessary to provide proof of
installation by a qualified electrician, together with their license number.
Examples of arrangements of contact wires (front view of socket-outlet):
• 3P + N + :
Phase wires L1, L2, L3 should be connected to the socket connectors marked as L1, L2, L3.
The protective wire should be connected to the grounding connector marked as PE .
The neutral wire N should be connected to the connector marked N.
Bekijk gratis de handleiding van Stamos PROLOX 65VO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamos |
| Model | PROLOX 65VO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29510 MB |
