Stamos PROLOX 65VO handleiding
Handleiding
Je bekijkt pagina 21 van 167
EN
• 3P + :
Phase wires L1, L2, L3 should be connected to the socket connectors marked as L1, L2, L3.
The protective wire should be connected to the grounding connector marked as PE .
CAUTION! The device may only be operated if connected to an installation with a functional fuse.
5.2.2. Gas connection
a) Place the gas cylinders away from the object to be welded and secure them against falling.
b) The gas connection of the welding machine must be connected to the gas cylinder or to the
gas supply system with a suitable hose and a regulator with a gas flow control. Caution! It is
not allowed to use network regulators for gas cylinders and vice versa. Such interchange may
result in reducer damage and personal injury.
c) The economical use of gas extends the welding time.
6. Product overview
Front view
1 – Control panel.
2 – Ground wire connector.
3 – Torch control cable
connector.
4 – Arc ignition connector on
the torch.
5 – Air supply connector for
the torch.
6 – The torch.
7 – Ground wire.
Bekijk gratis de handleiding van Stamos PROLOX 65VO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamos |
| Model | PROLOX 65VO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29510 MB |
