Stairville SonicPulse LED Bar 10 handleiding

Verlichting

Stairville

80 pagina's

PDF beschikbaar

Handleiding

7.2.1 Automatic programme

Automatic mode can only be activated if the device is operating in stand-alone mode or as

master in a master/slave combination. This setting is only relevant if the device is not con‐

trolled via DMX.

1. Press [Mode] repeatedly until the display shows ‘Auto’ . Conrm with [Setup].

2. Press [Up] or [Down] to select one of the automatic programmes (display ‘AU.01’ …

‘AU.03’ ). Conrm with [Setup].

The following automatic programmes are available:

Menu level 2 Function

‘AU.01’ Eect 2…Eect 8

‘AU.02’ Eect 9…Eect 24

‘AU.03’ All eects

3. Press [Up] or [Down] to set the playback speed of the automatic programme to between

‘SP.01’ (slow) and ‘SP.99’ (fast) or to ‘FL81’ (ash eect). Conrm with [Setup].

4. Press [Up] or [Down] to set the strobe frequency of the automatic programme to

between ‘FS.00’

(slow) and ‘FS.99’ (fast). Conrm with [Setup].

5. To exit the menu item without making changes, press [Mode].

Selecting an automatic pro‐

gramme

Setting the programme speed

Setting the strobe frequency

Operation

SonicPulse LED Bar 05, SonicPulse LED Bar 10

LED Bar

Bekijk gratis de handleiding van Stairville SonicPulse LED Bar 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.