Stairville SonicPulse LED Bar 10 Handleiding (80 Pagina's)

Handleiding

7.2.2 Pre-programmed automatic show

A pre-programmed automatic show can only be activated if the device is operating in stand-

alone mode or as master in a master/slave combination. This setting is only relevant if the

device is not controlled via DMX.

1. Press [Mode] repeatedly until the display shows ‘Pr.XX’ . Conrm with [Setup].

2. Press [Up] or [Down] to select one of the pre-programmed automatic shows (display

‘Pr.01’ … ‘Pr.24’ ). Conrm with [Setup].

For programme ‘Pr.01’ , you can set a static colour between ‘CO.00’ and ‘CO.39’ .

For programmes ‘Pr.02’ … ‘Pr.24’ you can set the playback speed to between ‘SP.01’

(slow) and ‘SP.99’ (fast) or to ‘FL81’ (ash eect).

3. Press [Up] or [Down] to set the strobe frequency of the automatic programme to

between ‘FS.00’ (slow) and ‘FS.99’ (fast). Conrm with [Setup].

4. To exit the menu item without making changes, press [Mode].

Operation

SonicPulse LED Bar 05, SonicPulse LED Bar 10

25

LED Bar

Bekijk gratis de handleiding van Stairville SonicPulse LED Bar 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.