SRS DC215 handleiding
Handleiding
Je bekijkt pagina 36 van 196
Basics 14
Stanford Research Systems DC215 Voltage/Current Source
Display and Entry Behavior
Focus
Digits entries or menu choices on either display that can be modified by the cursor keys
are said to be in “focus” and will intensity modulate (blink) at about 1 Hz. “Focus” can
refer to a single digit, a sequence number or a menu choice.
Modifying Settings with the Cursor Keys
Pressing any of the cursor keys will bring the most recently modified digit into focus
when adjusting settings. Press [←] or [→] to select the desired digit, then press [↑] or
[↓] to increment/decrement that digit. The setting is immediately
incremented/decremented upon pressing the [↑] or [↓], so it is unnecessary to press
one of the enter keys to load the new value.
Modifying Values with Numeric Entry
Values are entered by typing the value, followed by pressing one of the enter keys.
Select the unit keys (V/A, mV/mA) for current and voltage entries. For all other entries
these keys directly enter the displayed value regardless of units. Pressing [CLR] while
editing a value will revert to the previous value.
Navigating Menu and Selections with the Cursor Keys
Menus can be between one and three levels deep and are accessed by shifted keys as
described in Shifted Key Function (page 13). [↑] [↓] are used to cycle thru the different
choices on the present menu level. [→] or [Enter] drops you down a menu level. [←]
takes you up a level.
Single level menus:
▪ Use [↑] [↓] to display the desired choice.
▪ Press [Enter] to select the displayed choice.
▪ If the entered value is accepted, an “Update” message is displayed and the the
display returns to the main level. If not an error message is displayed and the
display remains on the current level.
Two/three level menus
▪ Use [↑] [↓] to display the desired submenu.
▪ Press [Enter] or [→] to enter the displayed submenu.
▪ Use [↑] [↓] to display the desired choice within the sub menu.
(These steps can be repeated for three level menus)
▪ When you selected the appropriate choice, press [Enter] to select the displayed
value.
▪ If the entered value is accepted, an “Update” message is displayed and the
front panel goes up a level in the menu. If not an error message is displayed
and the display remains on the current level.
▪ From here you can either
o Press [←] to return to go up a level or return to the main menu.
o Select other menu choices you wish to enter.
Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SRS |
| Model | DC215 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 30325 MB |