Spear & Jackson S7520EPSP handleiding
Handleiding
Je bekijkt pagina 18 van 25
18 AFTER SALES SUPPORT 0345 605 2067 of 25 V3.5: 11/23
MAINTENANCE
Motor Cooling
To avoid overheating and damage to the motor, always keep
the cooling air vents clean and free of sawdust and debris.
Adjust the chain tension
Always check the chain tension before use, after the rst cuts
and regularly during use, approx. every 10 minutes.
Loosen the bar locking knob (the inner circle) anti- clockwise
slightly, but do not remove the side cover.
Hold up the nose of the guide bar and turn the chain
tensioning knob (the out circle) clockwise. When the saw chain
is tensioned with 9N (approx.1kg), the gap between the saw
chain and the guide rail should never be more that 2mm.
Once the chain has been adjusted to a nger tight tension
then release the hand and turn the adjustment knob clockwise
to ensure the chain is further tightened into the operating
tension not exceeding 2mm from the bar guide rail.
Do not over tension the chain as this will reduce life of chain
bar and motor. With a correctly tensioned chain you will get
good cutting performance and a longer life.
Tighten the bar locking knob (the inner circle) by turning it
clockwise.
Max.2mm
9N
Nuts and Screws
Periodically check that all the nuts and screws are tightened
securely. Check that the cam-lock that controls the telecoping
pole is intact and in proper working order.
Bekijk gratis de handleiding van Spear & Jackson S7520EPSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Spear & Jackson |
| Model | S7520EPSP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2374 MB |
