Sony Trimaster HX BVM-HX1710N Handleiding (164 Pagina's)

Handleiding

47

HDMI In. Setting

 HDMI Format: Change the setting to

receive images in a high-

resolution HDMI signal

1)

.

 Standard Format: Select to

use for a standard HDMI

format signal.

 Enhanced Format: Select to

use for a high-resolution

HDMI format signal

1)

.

1) Signals in resolutions of 3840 × 2160

or 4096 × 21

60 are listed below:

4:4:4 RGB/YCbCr-50P/60P-8bit

si

gn

als

4:2:2 YCbCr-50P/60P-12bit signals

4:4:4 RGB/YCbCr-24P/25P/30P-10/

12

bit s

ignals

Notes

 Images and sounds may not be

output correctly with “Enhanced

Format.” In that case, select

“Standard Format.”

 To display the corresponding signal

with “Enhanced Format,” use a

Premium High-Speed HDMI cable

within a length of 3 meters (Sony

product recommended).

Aperture Sets the aperture of the selected

a

dva

nced preset.

Note

“Aperture” is disabled when “Picture

Out Disp.” is “On”.

User LUT Range Select a scaling type between LUT

range [0:1] (Full Range) and the Video

Range (Limited Range, Full Range) of

LUT input and output signals.

 Auto: Select whether to

automatically set up the input

and output range settings for

LUT data.

 On: Automatically sets up LUT

data input and output range

settings. See page 98.

 Off: Uses the value set in

"Input" or "Output."

Submenu Setting

 Input: Select a scaling type from the

following, applied when scaling

an input signal to an LUT input

range.

 Limited to Full: Scales Limited

Range input signals to the

LUT input range [0:1]. Signals

outside the signal level of 0 to

100% are clipped.

 No Scaling: The entire code

value of Limited Range or Full

Range input signals is

assigned to the LUT input

range [0:1] without scaling.

For Limited Range input

signals, signals with a signal

level of -7 to 109% are

processed.

 S-Log Range: The entire code

value of S-Log3 signal input is

assigned to the LUT input

range [0:1] without scaling.

This is used for S-Log3 input

signals.

Note

If "S-Log Range" is selected while the

User LUT function is On (User LUT data

is applied in "User LUT" in "Ch.

Setting"), the input signal is identified

as an S-Log3 signal.

When the input signal is an S-Log3

signal, note the following points.

-When "VPID/HDMI Auto" is "On," the

i

nte

rnal fixed value is applied to the

RGB/YCC Range setting value.

-When "VPID/HDMI Auto" is "Off," the

i

nt

ernal fixed value is applied to "RGB/

YCC Range" in "Ch. Setting" regardless

of its setting value.

Submenu Setting

Bekijk gratis de handleiding van Sony Trimaster HX BVM-HX1710N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.