Sony Trimaster HX BVM-HX1710N handleiding

Monitor

Sony

164 pagina's

PDF beschikbaar

Handleiding

is judged to be invalid (Invalid). If “No Assign” is

set to “Priority”, the “IP Input” is invalid (Invalid).

Example: When “Clean Switch” is set as

“Disable”

(bandwidth for available input: 24G)

IP Input1 Priority1 2160/50P 12G Valid

IP Input2 Priority3 1080/50P 3G Invalid

IP Input3 Priority2 2160/50P 12G Valid

IP Input4 Priority4 1080/50P 3G Invalid

Example: When “Clean Switch” is set as

“E

ble” (bandwidth for available input: 12G)

IP Input1 No Assign 2160/50P 12G Invalid

IP Input2 Priority4 1080/50P 3G Valid

IP Input3 Priority3 2160/25P 6G Valid

IP Input4 Priority2 1080/50P 3G Valid

 After setting, when you try to move to the

upper layer menu without executing Cancel or

Confirm, a message for executing Cancel or

Confirm is displayed. Select either one and

execute it.

 "JPEG XS" under "V Compression" can be set

when the optional "BVML-JD10" license (sold

separately) is activated.

User Color Temp.

You can select and adjust the color temperature.

When using a measurement instrument for color

temp

erature adjustment, Konica Minolta Color

Analyzer CA-310/410 is recommended.

Submenu Setting

User Color Temp. Select the color temperature setting to

be adjuste

Name Sets the color temperature name.

R/G/B Gain Adjusts the color balance (gain) of R

ed)/

G (green)/B (blue).

R/G/B Bias Adjusts the color balance (bias) of R

(red)/G (green)/B (blue). (Default

value: 0)

Notes

 Check the black level with the

PLUGE signal, etc. after adjusting

the color temperature, and adjust

the black level under “Brightness”

of “Chr./Bright./Cont.” in “Ch.

Setting” as necessary.

 When “Out. Image(Single)”

(page 87) of the “Enhanced Out.”

menu is set to “Fixed”, the color

emper

ature cannot be adjusted.

When adjusting the color

temperature, change “Out.

Image(Single)” to “Displayed”.

Copy From Select from the following items to copy

e s

elected color temperature data.

 D65

 D93

 D60

 D50

 DCI

 DCI XYZ

 User1 to User10

Note

The color temperature data is used

commonly regardless of the signal

format or the EOTF setting. When the

color temperature is adjusted under

certain conditions, the adjusted result

is reflected in all displays on which the

same color temperature data is set.

Signal Select the signal to adjust the color

temperature. (Default value: Internal)

 Internal: Select to adjust the color

temperature by using the

internal signal. For XYZ format

ignal

s, this unit displays the

internal signal equivalent to

D65 48 cd/m

 External: Select to adjust the color

temperature by using the

signals input from an external

device.

Note

For the XYZ format signals, set the

contrast to 192 to change the standard

brightness (at SDR 100 % white signal

input) to 48 cd/m

Submenu Setting

Bekijk gratis de handleiding van Sony Trimaster HX BVM-HX1710N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.