Sony Sonic Surf VR handleiding
Handleiding
Je bekijkt pagina 17 van 24
17
Likewise, when shutting down, turn off all the control units first
followed by the Master Player PC and the Sub Player PCs.
The Master Player PC and Sub Player PCs can be turned off
in any order.
Configuring a Player PC
The following procedure must be followed for all Player PCs
that make up a multi player system.
1
Connect all devices and then turn the power on.
2
Enter the initial ID and password of the Player PC to
log in.
Initial ID: SSVR
Password: SsvrFull
3
Launch “HDSPe FX Settings” from the notification
area of the Windows taskbar to check the MADI sync
status.
4
Set and check the following.
• Check that there is no error indicated in [Sample Rate].
• Set [Clock Source] to [Word Clock], and check that
“Word” is displayed for [Current].
• Check that “Sync” and “48 kHz” is displayed for “Word”
in the [Input Status] block.
• Clear the check mark from [Word Clock In Term.] under
[Options].
• If a signal is not input on the word clock input connector of the
Player PC, [Sample Rate] is displayed in red and “No Lock” is
displayed for “Word” in the [Input Status] block.
• If a signal other than 48 kHz is input on the word clock input
connector of the Player PC, [Sample Rate] is displayed in red and
a frequency value other than 48 kHz is displayed for “Word” in the
[Input Status] block.
5
Repeat steps 2 to 4 on all Player PCs.
Notes
Bekijk gratis de handleiding van Sony Sonic Surf VR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | Sonic Surf VR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2676 MB |
