Sony SNC-VM600 handleiding
Handleiding
Je bekijkt pagina 28 van 62
Administrating the Camera
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
28
I-picture interval
Set the I-picture insertion interval in seconds.
H.264 profile
Set the profile setting for H.264 video codec to high,
main or baseline. The video compression efficiency is
high, main and baseline in sequence. The specified
profile may not be available depending on the program
you use. Select the profile which is suitable for your
program.
CBR
Selectable bit rates are CBR and VBR. Select CBR if
you want to compress an image by constant bit rate.
Select VBR if you want to maintain image quality.
When you select On in the CBR drop-down list, CBR
will be applied. When you select Off, VBR will be
applied. When VBR is selected, you can set the image
quality.
Image quality
The image quality setting will not be displayed when the
video codec is set to H.264, when CBR is set to On, or
when the adaptive rate control is selected.
Selectable values are from 1 to 10.
When 10 is selected, the best image quality is achieved.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth. This
function is not available when the setting is set to 0.
OK/Cancel
See “Buttons common to every menu” on page 20.
Audio Tab
Audio sending
Make settings for sending audio from the m
microphone input connector.
Enable
Select the checkbox if you want to send audio from the
network camera.
Note
When you change the Audio setting, click Refresh on
the Web browser to reflect the change on the opening
live viewer page.
Audio in
Select microphone input or line input.
SNC-XM637/XM636/XM632 models only have a built-
in microphone. An audio cannot be selected.
Mic volume
When the Audio in is set to microphone input, set the
volume level of the audio input from the m microphone
input connector. It is adjustable from –10 to +10.
Audio codec
Select the codec type of audio from the m microphone
input connector. The bit rate may differ, depending on
the codec type.
Note
No audio is output if the Plug-in free viewer is used.
Audio upload
Using SNC audio upload tool, you can output audio that
is input to the computer’s audio input terminal from a
powered speaker connected to the line output jack of the
camera.
This function is not available for SNC-XM637/XM636/
XM632.
Enable
Select the checkbox to enable the audio upload function.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See “Buttons common to every menu” on page 20.
Superimpose Tab
Select whether or not to superimpose the custom string
and the character date & time on the image.
Notes
• For setting the superimposing, set Image size1 in the
Video codec tab of the Video / Audio menu or Video
menu to the maximum rate.
• Deselect the checkbox of Stabilizer in the Installation
tab of the System menu. After setting superimpose, set
the Stabilizer function again.
Preview screen
Preview the image, and adjust the superimposed image.
You can move the position of superimposed image
displayed on the preview screen by drag and drop.
Bekijk gratis de handleiding van Sony SNC-VM600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | SNC-VM600 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9602 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 760 g |
| Hoogte | 108 mm |
| Ondersteund audioformaat | AAC |
| Ondersteunde videoformaten | H.264, M-JPEG |
