Sony MSU-950 handleiding
Handleiding
Je bekijkt pagina 42 van 49
42
Initial Settings
[Not Own Call Extended]: Enable Extended Call Mode
for all call signals not from this unit.
[Always Extended]: Enable Extended Call Mode for
all call signals.
When the settings are completed
Press
[Exit] to exit this menu.
Configuring System Connection Settings
The MSU-900/950 supports system connections via the
CCU/CNU REMOTE connector and connections to
camera network systems via the Ethernet connector.
To configure system connection settings, proceed as
follows.
Configure system connection settings from the MSU
Configuration menu in Engineer mode.
1
Press [Network] on the MSU Configuration menu.
The network configuration menu appears.
2
Press [CNS].
The Camera Network System (CNS) settings screen
appears.
3
Select a system connection mode.
[Legacy]: Select this mode when using the CCU/CNU
REMOTE connector and a CCA-5 cable for system
connection.
[Bridge]: Select this mode when using Ethernet to
connect the MSU to a CCU or camera on a one-to-
one basis.
[MCS]: Select this mode when using Ethernet to
connect to a multi-camera system (MCS)
comprised of multiple cameras, CCUs, and panels.
(Factory setting: Legacy)
• When using Bridge or MCS mode, be sure to press
the
[Mode Set] button and configure the submode
for the respective mode beforehand.
• When using an Ethernet connection, be sure to
configure the Ethernet connection settings.
4
Specify the MSU No.
Specify a number that is not currently in use by another
MSU in the system.
5
Press [Set].
To restore the previous setting, press
[Cancel] instead
of
[Set].
To apply the configurations, you must restart the unit.
When the settings are completed
Press
[Exit] to exit this menu.
Configuring the Submode for Bridge Mode
Use Bridge mode when connecting the MSU to a CCU on
a one-to-one basis. The device that connects to the unit is
referred to as the “target.”
Note
Ext Time
[min]
Extended Call Mode
MSU Switch Setting
5
Exit
ON
Mode
Not Own Call
Extended
ON
Shutter
Angle Mode
Engineer Mode
2/2
Security
Infor-
mation
MSU Configuration
MSU
Adjusting
Exit
Date /
Time
Memory
Stick
MSU SW
Set
Network
Engineer Mode
TCP/IP
Ethernet IF
Network Configuration
Exit
CNS
Engineer Mode
Notes
Note
Cancel
Set
Bridge
Mode
Set
MCS
1
MCS No.
Mode
Set
Camera Network System Setting
Exit
Legacy
Engineer Mode
Mode: Active
Target: 192.168.0.100
Mode: Master
Target: 192.168.0.101
Bekijk gratis de handleiding van Sony MSU-950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | MSU-950 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6373 MB |
