Sony CBK-3621XS handleiding
Handleiding
Je bekijkt pagina 28 van 173
Location and Function of Parts
28
ND filter slot block
Slot for inserting the supplied ND filters.
(phi) mark
The (phi) mark indicates the position of
the image sensor surface.
Use this mark as a reference to accu
rately
measure the distance from the camera to
the subject.
E-mount block
Lens release button
24 V OUT connector (Fischer 3-pin)
External power supply output connector.
It outputs the power supply connected to
th
e 24 V IN connector of the camera body
adap
tor.
It can be connected as an external power
s
upply for a lens servo or other device. It
can also be used to input a REC Trigger
signal.
Notes
• Depending on the output current and the
length of the detachable cable, the voltage of
the power supply output from this connector
may be lower than the voltage of the power
supply connected to the 24 V IN connector.
– Detachable cable (4.5 m (14.8 ft)):
Ap
proximately 0.50 V drop at 1 A output or
1.
00 V drop at 2 A output
– Detachable cable (12 m (39.4 ft)) (option):
Ap
proximately 1.40 V drop at 1 A output or
2.80 V drop at 2 A output
• For details about Fischer 3-pin connector
sp
ecifications, refer to the MPC-3628/
MPC-3626 Operating Instructions.
ASSIGN (assignable) button 5
Toggles the assigned function between
on/off (enable/disable) or activates the
function with each press.
The lamp is lit orange when the assigned
fun
ction is on (enabled) or activated.
For details about function assignment,
refer to the MPC-3628/MPC-3626
Ope
rating Instructions.
LED (red)
Functions as REC lamp and error/warning
indicator.
LED (green)
Lit when the power supply is on.
PL-mount adaptor
LENS META IN connector
(LEMO 4-pin)
Lens metadata input connector.
Connector used on the unit:
LEMO EGG.0B.304.CLL
Communications protocol: Cooke/i
Communications levels: RS-232C
Typical compatible connector (reference
o
nly): LEMO FGG.0B.304.CLAD56
Notes
• For details about accessory mounting holes,
see the external dimensions drawing at the
back of this document.
• Before connecting, turn off b
oth the unit and
the device to which you are connecting.
• Be sure to connect an RS-232C compatible lens
metadata comm
unications device correctly.
Incorrect signal connection may damage the
device.
No. Signal
1 Data IN
2 Data OUT
3 GND
4 NC
Bekijk gratis de handleiding van Sony CBK-3621XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | CBK-3621XS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24336 MB |
