Sony CBK-3621XS handleiding
Handleiding
Je bekijkt pagina 29 van 173
Attaching to the Camera
29
Notes
• Turn off the camera and wait 30 minutes or
longer to allow it to cool sufficiently before
attaching/removing the unit.
Perform the operation quickly in a dust-free
loca
tion to prevent dust and other matter from
entering the camera and adaptors.
• Take care not to damage the co
nnectors and
parts.
• A data transfer error may
occur if there is any
dust or other matter adhering to the adaptor
connectors. If this occurs, clean the connector.
1 Remove the four hex screws on the
bottom and remove the bottom
plate (), then remove the four
hex
screws on the front and
remove the imager block from the
camera body ().
Note
Orient the lens side face down when placing
the removed imager block on a flat surface.
If the heat sink side is placed face down, the
flange back distance (flange focal distance)
may change.
2 Attach the camera body adaptor
() and then attach the bottom
p
late ().
Align and attach using the eight hex
screws, removed in step 2, and tighten
using a hex wrench (tightening torque
of 1.4 N·m).
Attaching to the Camera
ʓ
ʔ
Imager block
Bottom plate
Short screws
ʓ
ʔ
Short screws
Bekijk gratis de handleiding van Sony CBK-3621XS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | CBK-3621XS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24336 MB |
