Sony BRC-AM7 handleiding
Handleiding
Je bekijkt pagina 6 van 12
6
3 Press the [OK] button.
Using the camera in Listener mode
Configure the following settings.
1 Set [Stream] – [Stream] – [Stream Setting] –
[Setting] to [SRT-Listener] in the web
menu.
2 Enter the port number of the camera in
[SRT] – [Port Number].
3 Press the [OK] button.
Setting the Latency and TTL
1 Set [Latency] and [TTL] according to your
communication environment.
2 Press the [OK] button.
• It is recommended that you measure the
RT
T to your destination beforehand and
set a sufficiently large latency accordingly.
• For details about adjusting the latency
a
ccording to the communication
environment, refer to the information
provided by the SRT Alliance.
https://www.srtalliance.org/srt-
deployment-guide/
Setting encryption
Set the following if you want to encrypt
transmitted data using a passphrase.
1 Select the key length for the encryption to
use in [Encryption].
To disable encryption, select [Off].
2 Enter the passphrase you want to set in
[Passphrase].
3 Press the [OK] button.
To change the setting, press the [Clear]
but
ton to delete the existing passphrase and
enter a new passphrase.
When encryption is enabled, enter the key
l
ength and passphrase configured on the
camera on the destination device.
Setting the Adaptive Rate Control (ARC)
function
When the Adaptive Rate Control function is
enabled, interruptions in the image caused by
communication line congestion can be reduced.
1 To enable the Adaptive Rate Control
function, set [ARC] to on.
Bekijk gratis de handleiding van Sony BRC-AM7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | BRC-AM7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1946 MB |
