Sony BRC-AM7 handleiding
Handleiding
Je bekijkt pagina 5 van 12
5
Getting Started
This section describes the setup required for
enabling the SRT function of the unit.
Setting the IP Address using the
RM-IP Setup Tool
An appropriate IP address must be configured to
support IP-based communication between the
camera and devices with which to communicate.
Configure an IP address to support IP
communication between your computer and the
camera using the “RM-IP Setup Tool.”
For details, refer to the “RM-IP Setup Tool Guide.”
Note
The DHCP setting cannot be enabled using the
RM-IP Setup Tool.
Setting the Initial Password
Configure the default password (initial password)
according to the instructions in the BRC-AM7
Help Guide.
Related section in the Help Guide
• “Initializing the Unit Using the Web App” –
“Initializin
g the Unit”
Setting the Camera Codec
For the SRT function, only the [Video Stream 1]
channel can be used.
H.265 does not support SRT.
Setting the Camera Audio
Configure the audio settings using [Stream] –
[Audio Stream] in the web menu.
Configuring the SRT Settings
Before starting SRT communication, configure
the port to use and whether the camera will be
used in SRT Caller mode or Listener mode.
• The Caller is the side that starts the
comm
unication, and the Listener is the side
that listens for the communication.
• One side must be set as a Caller and the other
sid
e as a Listener.
• Generally, a device inside a firewall is set as the
C
aller, and a server device with a global IP
address is set as the Listener.
• The camera can be operated as either the Caller
or
Listener. When the camera is set as the
Caller, set the destination as the Listener. When
the camera is set as the Listener, set the
destination as the Caller.
• Some devices may support operation as Caller
only o
r Listener only. In that case, set the
camera mode accordingly for the mode of the
destination.
• For details about setting the SRT mode of the
d
estination, refer to the operating instructions
for the destination.
• For details about setting up the SRT
en
vironment, refer to the information provided
by the SRT Alliance.
https://www.srtalliance.org/srt-deployment-
guide/
Using the camera in Caller mode
Configure the following settings.
1 Set [Stream] – [Stream] – [Stream Setting] –
[Setting] to [SRT-Caller] in the web menu.
2 Enter “srt://” + IP address of the
destination + “:” + port number in [SRT] –
[Destination].
Input example: srt://192.168.0.1:5000
Bekijk gratis de handleiding van Sony BRC-AM7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | BRC-AM7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1946 MB |
