Sony BRC-AM7 handleiding
Handleiding
Je bekijkt pagina 4 van 12
4
Flowchart
The following flowchart shows the procedure for configuring the SRT function of the camera.
Start SRT configuration
Configure video and audio supported by
the SRT function as described in “Getting
Started” (page 5).
Determine which port to use for SRT
Use the camera in Caller mode?
No
Yes
Set streaming mode to SRT-Caller
(page 5).
Set streaming mode to SRT-Listener
(page 6).
Set destination to Listener mode.
Check the IP address of the destination.
Set the port to use for SRT on the
destination.
Set destination to Caller mode.
Set the IP address of the camera and the
port for SRT in the SRT settings on the
destination.
Set the IP address of the destination and
the port to use for SRT on the camera.
Set the port to use for SRT on the camera.
Set the latency and TTL (page 6).
Use encryption?
No
Yes
Enable the encryption setting on the
camera and enter the passphrase (page 6).
Refer to the operating instructions of the
destination device to enable the
encryption setting on the destination
and enter the passphrase.
End
Bekijk gratis de handleiding van Sony BRC-AM7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | BRC-AM7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1946 MB |
