Sony BRC-AM7 handleiding
Handleiding
Je bekijkt pagina 7 van 12
7
2 Press the [OK] button.
Troubleshooting
This section describes how to troubleshoot
problems that may occur with the SRT function of
the camera.
Unable to connect
Case 1 Check the status of the network
co
nnection.
Case 2 Check the Caller/Listener mode settings.
Whe
n the camera is set to Caller mode, set
the destination to Listener mode. When the
camera is set to Listener mode, set the
destination to Caller mode.
Case 3 Check the passphrase setting of the
d
estination. The settings on the camera and
destination must both be the same.
Case 4 The destination device may be using an
u
nsupported image quality or picture size.
Select settings that are supported by the
destination using [Stream] – [Video Stream]
in the web menu.
Video is interrupted or distorted
Case 1 Your network may be unstable. Try using
a
stable connection, such as a wired
connection.
Case 2 [Latency] may not be set to a latency
v
alue recommended by the SRT Alliance. For
details about adjusting the latency, refer to
the information provided by the SRT
Alliance.
https://www.srtalliance.org/srt-
deployment-guide/
Image deteriorates and then recovers
The Adaptive Rate Control (ARC) function
d
etected a network instability and is now
operating. Try one of the following actions:
• Connect to a stable network.
• Connect to a faster network.
• Select a lower bit rate using [Stream] – [Video
S
tream] – [Video Stream 1] – [Bit Rate 1] in the
menu.
• Set [Stream] – [SRT] – [ARC] to off in the menu
to d
isable ARC.
Bekijk gratis de handleiding van Sony BRC-AM7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | BRC-AM7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1946 MB |
