Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 38 van 48
Editing drum kits
38
② Turn the PAN knob to set the panning.
• The panning is shown on the display.
• The adjustment range is 63–CTR–63.
• Press the instrument buttons/pad keys to confirm
the sounds.
Setting instrument levels
① Press the button for an instrument to select it for lev-
el setting.
② Turn the
LEVEL knob to set the level.
• The level is shown on the display.
• The adjustment range is 0 - 127.
• This changes it in a range of − 12 – 12 dB.
• Press the instrument buttons/pad keys to confirm
the sounds.
Playing instruments backward
① Press the button for the instrument you want to play
backward.
② Press
to enable reverse playback (lights red).
• Press again to disable reverse playback.
• Press the instrument buttons/pad keys to confirm
the sounds.
Linking HAT 1 and HAT 2
① Press
(lights red)
.
• Press it again to unlink them ( button unlit).
Setting the overall EQ
① Turn the TOTAL EQ knobs to adjust the tone.
• The parameter is shown on the display.
• Press the instrument buttons/pad keys to check
sounds.
• This is a 4-band equalizer.
1. LPF: CUTOFF (0–127) (20–400 Hz)
Setting the length of individual instru-
ments sounds
① Press the button for an instrument to select it for
length setting.
② Turn the
TIME knob to set the time.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This can be set to 10–100% of the sample length.
• Press the instrument buttons/pad keys to confirm
the sounds.
Adjusting instrument slopes
① Press the button for an instrument to select it for
slope setting.
② Turn the
SLOPE knob to set the slope.
• The parameter is shown on the display.
• The setting range is DC.63–OFF–AT.63.
• As the DC value increases, the decay length be
-
come shorter. As the AT value increases, the attack
length becomes longer.
• Press the instrument buttons/pad keys to confirm
the sounds.
Setting the instrument effect send am-
ount
① Press the button for an instrument to select it for
send amount setting.
② Turn the
→ FX knob to change the send amount.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This changes it in a range of 0–100%.
• When FX is on, the send amount can be checked by
pressing the instrument button/pad key.
• When using an insert type effect, the effect send
amounts of each individual instrument is not used
(unless the value is 0, which disables the eect for
that instrument).
Setting instrument panning
① Press the button for an instrument to select it for
panning setting.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
