Sonicware LIVEN BASS&BEATS handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 39 van 48
Editing drum kits
39
Press the instrument buttons/pad keys to check
sounds.
The adjustment range is 0–127.
Pattern settings before activating the drum kit edit
-
ing mode will be reected.
It will not be saved in the kit settings.
Changing and checking the effect send
amount of the entire drum kit
While pressing , press
(lights orange)
, and
turn the
VALUE knob.
Press the instrument buttons/pad keys to check
sounds.
The adjustment range is 0–127.
Changing and checking the velocity
① Press (lights red), and turn the VALUE knob.
Press the instrument buttons/pad keys to check
sounds.
The adjustment range is 0–127.
It will not be saved in the kit settings.
Playing the sample sequence pattern
Press
.
Press again to stop playback.
During playback, the pad keys can also be used to
play the instruments.
The pattern before activating the drum kit editing
mode will be played.
Muting instruments
While pressing
, press the instrument button.
This mutes the instrument.
Press the instrument button again while pressing and
holding
to unmute it (lit).
It will not be saved in the kit settings.
RESONANCE (0–127) (0.1–10)
2. MID 1: FREQ (0–127) (300–1500 Hz)
GAIN ( 63 – 63) ( 24 – +24 dB)
3. MID 2: FREQ (0–127) (1000–4000 Hz)
GAIN ( 63 – 63) ( 24 – +24 dB)
4. HSF: FREQ (0–127) (4000–12000 Hz)
GAIN ( 63 – 63) ( 24 – +24 dB)
Setting kit levels
While pressing
(lights orange)
.
② Turn the
VALUE knob to adjust the level.
The level is shown on the display.
The adjustment range is 0–127.
• This can be set from ∞ to +6 dB (63 is 0 dB).
Turning the e󱐯ect on/o󱐯
While pressing , press (lights orange), and
select ON/OFF.
Press the instrument buttons/pad keys to check
sounds.
Pattern settings before activating the drum kit edit
-
ing mode will be reected.
• It will not be saved in the kit settings.
Changing and checking the e󱐯ect type
While pressing
, press
(lights orange)
, and
turn the
VALUE knob.
Press the instrument buttons/pad keys to check
sounds.
The adjustment range is 0–127.
Pattern settings before activating the drum kit edit
-
ing mode will be reected.
It will not be saved in the kit settings.
Changing and checking the e󱐯ect amount
While pressing , press
(lights orange)
,
and turn the
VALUE knob.

Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSonicware
ModelLIVEN BASS&BEATS
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6180 MB