Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 37 van 48
Editing drum kits
37
Muting instruments
① While pressing , press the instrument button.
This mutes the instrument.
• Press the instrument button again while pressing
and holding
to unmute it (lit).
• It will not be saved in the kit settings.
Playing the sample sequence pattern
① Press .
• Press again to stop playback.
• During playback, the pad keys can also be used to
play the instruments.
• The pattern before activating the drum kit editing
mode will be played.
Selecting instrument sounds
① Press the instrument button for the sound you want
to select.
② Press the desired group button.
• The sound name appears on the display.
③ Turn the
VALUE knob to select the sound.
• Press the instrument buttons/pad keys to confirm
the sounds.
Setting the pitches of instruments
① Press the button for an instrument to select it for
pitch setting.
② Turn the
TUNE knob to set the pitch.
• The parameter is shown on the display.
• The adjustment range is − 60 – 60.
• This changes it in a range of ± 1 octaves.
• Press the instrument buttons/pad keys to confirm
the sounds.
• 5 is a semitone change.
④ Press
.
⑤ Input the name. (The character at the current posi
-
tion blinks.)
• Use and to move the input position left and
right. (Three dot positions occur between the four
characters.)
• Turn the
VALUE knob to select the character (or
turn the dot on/o at a dot position).
• Uppercase alphabet letters and numbers can be
used.
⑩ Press
to save the kit.
Clearing kits
① Follow steps ① – ④ in "Activating drum kit editing
mode".
② While pressing
, press .
• INIT will appear on the display.
• The selected kit will be set to default values.
• The kit can be further edited after this.
Copying kits
① Follow steps ① – ④ in "Activating drum kit editing
mode".
② While pressing
, press .
③ Use
and or the VALUE knob to select the
number of the kit to copy.
• Kits can also be selected by pressing the step but-
tons.
• When
or is pressed, the bank name is shown
on the display for two seconds.
• The volume-type
VALUE knob can also be turned
to select banks.
• The kit name is shown on the display while the
VALUE knob is being turned.
④ Press
to copy the kit and start kit editing mode.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
