Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 34 van 48
Editing bass patch memory parameters
34
Changing and checking the voice mode
① While pressing , press to select the voice
mode.
• The voice mode is shown on the display.
• MONO or LGT can be selected.
• The current voice mode will be shown when this but
-
ton is rst pressed.
• It will not be saved in the patch memory settings.
Changing and checking the glide
① While pressing , press to select the voice
mode.
• The voice mode is shown on the display.
② Turn the
VALUE knob to set the glide.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• The time can be changed in a range of 0–10000 ms.
• It will not be saved in the patch memory settings.
Changing and checking the velocity
① Turn the VELO knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• It will not be saved in the patch memory settings.
Changing and checking the assigned pa-
rameters
① Turn the ASSIGN1 or ASSIGN2 knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• It will not be saved in the patch memory settings.
• The connected value is shown on the display.
• "----" appears for parameters that cannot be connect
-
ed.
• The parameters that cannot be connected are OSC
OUTPUT → , OSC shaper-type, OSC unison-voices,
NOISE type, FILTER type, LFO SHAPE, LFO sync, EG
up crv, and EG down crv.
④ Turn the
VALUE knob to set the connected value.
• The connected value is shown on the display.
• The adjustment range is − 127 – 127.
• Both
VALUE knobs can be used to change val-
ues. The encoder-type knob changes 1 step at a
time and the volume-type knob changes 2–3 steps
at a time.
• Pressing the button or the modulator selected in ①
will cancel assignment.
• Four types of modulators can be assigned.
1. ASSIGN
2. LFO
3. EG
4. VELO
• LFO2→LFO1, MOD EG2→MOD EG1 (AMP
EG), MOD EG1 → AMP EG, VELO → LFO&EG and
EG → LFO assignments are also possible.
Changing the memory level
① Turn the MEMORY LVL knob.
• The memory level is shown on the display.
• The adjustment range is 0 - 127.
• This can be set from −∞ to +6 dB (63 is 0 dB).
Changing and checking the octave
① Press
, or press while pressing .
• The octave setting is shown on the display.
• The octave can be changed by up to ± 3.
•
lowers the octave. + raises the octave.
• It will not be saved in the patch memory settings.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
