Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 33 van 48
Editing bass patch memory parameters
33
Setting envelope starting delay times
① Press the button for an envelope to choose it for de-
lay time setting.
② Press
, and select page 2.
The PAGE LED will light.
③ Press
.
The delay LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the delay time.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This changes it in a range of 0–2000 ms.
• Both the encoder-type and volume type
VALUE
knobs can be used.
Assigning modulator outputs to parame-
ters
① Press the button twice for a modulator to enable
connecting its output.
The selected modulator button blinks red.
• To select the ASSIGN 1 modulator, press
twice. To select the ASSIGN 2 modulator, press
+
twice.
• Assigned modules will blink green
② Press the modulator button for the parameter you
want to assign.
The selected modulator button lights red.
• The modulator selected in ① cannot be selected.
• The assigned parameter will blink red.
③ Press
along with the button for the parameter
you want to connect.
The selected parameter LED will light.
Setting envelope curves
① Press the button for an envelope to choose it for
curve setting.
② Press
, and select page 2.
The PAGE LED will light.
③ Press
or .
The LED for that button will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the curve.
• The curve is shown on the display.
• The adjustment range is − 9 – 9.
• As the number increases in the negative direction,
the envelope curve takes eect faster.
• As the number increases in the positive direction,
the envelope curve takes eect slower.
• At 0 the envelope curve becomes linear.
• Both the encoder-type and volume-type
VALUE
knobs can be used.
Setting envelope depths
① Press the button for an envelope to choose it for
depth setting.
② Press
, and select page 2.
The PAGE LED will light.
③ Press
.
The depth LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the depth.
• The depth is shown on the display.
• The adjustment range is 0–127.
• This changes it in a range of 0–100%.
• Both the encoder-type and volume-type
VALUE
knobs can be used.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
