Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 17 van 48
Pattern playback and settings
17
② Select ON or OFF.
• ON or OFF will appear on the display.
Setting the ducking function
① Turn the DUCKING knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This affects the LINE IN and bass in response to
the notes of KICK1 and KICK2.
Turning the eect on/o
① Press (lights red).
• ON or OFF will appear on the display.
• Press this again to turn it o (it becomes unlit).
Setting the eect type
① While pressing
, press .
② Turn the
VALUE knob to select the eect.
• The eect type name is shown on the display.
• 13 types of eects can be chosen.
1. Chorus (CHRS on display)
2. Flanger (FLNG on display)
3. Send delay (S.DLY on display)
4. Insert delay (I.DLY on display)
5. Crush (CRSH on display)
6. HALL
7. ROOM
8. Mono reverb (M.RVB on display)
9. Distortion (DIST on display)
10. Low pass lter (LPF on display)
11. High pass lter (HPF on display)
12. Isolator (ISO on display)
13. Tilt EQ (TLT.F on display)
• Eects include insert and send types. When insert
eects are OFF, they are disabled and the sound is
output directly. Otherwise, signals are sent to insert
eects at 0 dB and not output directly.
will blink in time with the set tempo.
• When the tempo is shown on the display, the
VALUE knob can be turned to change it in 0.1-beat
increments.
Setting the BPM mode
① While pressing , press SYSTEM, and select
BPM.
• The BPM will be shown on the display.
② Turn the
VALUE knob to select the mode.
• The mode is shown on the display.
• Two modes can be chosen.
1. PATTERN (PTN on display): The BPM set with
the pattern is used.
2. GLOBAL (GLBL on display): The global BPM is
used.
Setting a pre-count
① While pressing , press METRO, and select
PR.CT.
• PR.CT will appear on the display.
② Turn the
VALUE knob to change the pre-count.
• The count number is shown on the display.
• The setting options are OFF and 1–8.
Automatically advancing steps during
step recording (auto step mode)
① While pressing , press SYSTEM, and select
A.STP.
• A.STP will appear on the display.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
