Sommer ENTRAcode+ handleiding
Handleiding
Je bekijkt pagina 25 van 36
25
9. Operation / Operation in Standard mode
9.4 Changing the PIN code
NOTE
Each ENTRAcode+ is programmed with the
same standard PIN code 1111 at the factory.
► For security reasons, the standard PIN code
must be changed before programming on a
radio receiver!
► On the battery-operated version
ENTRAcode+ AP, rst press the # key to
wake the device from power-saving mode.
p. "9.2 Entering a sequence of digits in Standard
mode" on page 24
Example code 4712
A
1
2
B
1
2
1
2
1
2
C
3
4
D
7
8
1
2
1
2
E
A. Press the
*
key.
B. Enter current PIN code.
⇒ Backlighting flickers for 1 s
C. Press the
*
key.
D. Enter new PIN code (in the example shown here,
4712).
E. Press the
*
key.
⇒ The green and red LED light up for 2 s
✔ PIN code has been changed
9.3 Unlocking the ENTRAcode+
NOTE
In as-delivered state, the ENTRAcode+ is
locked and no input is possible. The device
must be unlocked before initial commission-
ing.
#
► Press and hold the # key for 5 s.
⇒ Red, green LED and backlighting
blink
⇒ Red and green LED go out
⇒ Backlighting lights up
✔ ENTRAcode+ was successfully unlocked
Bekijk gratis de handleiding van Sommer ENTRAcode+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | ENTRAcode+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3875 MB |
