Sommer ENTRAcode+ handleiding
Handleiding
Je bekijkt pagina 24 van 36
24
9.2 Entering a sequence of digits in
Standard mode
To enter the sequence 9344, proceed as follows:
9
0
A
3
4
B
3
4
C
3
4
D
A. Press the 9 l 0 key briefly.
⇒ Green LED blinks briefly
B. Press key 3 l 4 briefly.
⇒ Green LED blinks briefly
C. Press key 3 l 4 briefly.
⇒ Green LED blinks briefly
D. Press key 3 l 4 briefly.
⇒ Green LED flickers when a radio command is
transmitted
✔ Sequence 9344 has been accepted
✔ Radio command was sent
9.1 Features of Standard mode
NOTE
Standard mode is the simplest way to oper-
ate the ENTRAcode+.
► Only one radio command is available, for
example to Open a house door or Open a
garage door.
► It is not necessary to pay attention to the
double assignment of the keys. You only
need to press the key once briey, irrespec-
tive of whether you wish to enter the rst or
second digit on the key.
► Entry of a sequence of digits can be termi-
nated by pressing the R key.
► On the battery-operated version ENTRA-
code+ AP, rst press the # key to wake the
device from power-saving mode.
► If an invalid PIN code is entered, the red LED
blinks for approx. 3 seconds (only after entry
of an 8-digit sequence).
► If an invalid PIN code is entered three times
(3 x 8 digits), both the red and the green LED
blink for approx. 20 seconds.
Changing the operating mode "8.4 Changing
the operating mode" on page 22.
Radio commands 1
Length of the code 4–8 digits
PIN code
1111
9. Operation / Operation in Standard mode
Bekijk gratis de handleiding van Sommer ENTRAcode+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | ENTRAcode+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3875 MB |
