Sommer ENTRAcode+ handleiding
Handleiding
Je bekijkt pagina 23 van 36
23
8. Operation / Operation for both operating modes
Example code 321 654 987
NOTE
Irrespective of whether the ENTRAcode+
is operated in Standard or Extended mode,
when entering the reset code, the digits can
be entered one after another without paying
attention to whether the key is pressed brief-
ly or pressed and held.
A
#
3 4
B
1 2
1 2
5 6
5 6
3 4
9 0
7 8
7 8
C
#
A. Press the
*
key, then press the # key.
B. Enter the reset code.
A. Press the
*
key and then the # key again.
⇒ The green and red LED light up for 2 seconds
⇒ During this time, the backlighting goes out
✔ The factory settings have been successfully restored
8.6 Entering the reset code
NOTE
► In as-delivered state, the 9-digit reset code
can be found on the housing of the ENTRA-
code+. This code must be kept in a safe
place.
► In Extended mode, too, it is not necessary to
pay attention to the double assignment of the
keys when entering the reset code.
► Entering the reset code resets the ENTRA-
code+ to the factory settings.
► The factory PIN codes are then valid again.
See "9.1 Features of Standard mode" on
page 24 and "10.1 Features of Extended
mode" on page 27.
► Set transmission delay is deactivated.
► Set active time is deactivated.
► Standard mode is activated.
► If one of the digits entered was incorrect, the
ENTRAcode+ blinks red several times after
input of the ninth digit and then switches o.
The process must then be repeated from the
beginning.
► On the battery-operated version
ENTRAcode+ AP, rst press the # key to
wake the device from power-saving mode.
Bekijk gratis de handleiding van Sommer ENTRAcode+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | ENTRAcode+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3875 MB |
