Solid State Logic SSL 18 handleiding
Handleiding
Je bekijkt pagina 15 van 54
Switching S/PDIF connections between Coaxial & Optical connections can be made in the 360° mixer page, under the settings tab. A
power cycle is required to apply the changes.
7. INS RTN 1 & 2
The jack sockets labelled 'INS RTN 1 & 2' are insert return paths for analogue inputs 1 & 2. Next to these are outputs labelled 9/1 SND
& 10/2 SND.
By default, these act as standard outputs 9 and 10 from SSL 18. However, in the SSL 360° SSL 18 Mixer Settings menu, you can re-
purpose the outputs to be used as inserts sends that are moved from the outputs, to be placed in the record path of analogue inputs 1 &
2. Once this is configured, you will see INSERT buttons in the SSL 18 Mixer page that you can engaged/disengage. This feature allows
you to track with external processing in the input path - like recording 'to tape' with analogue processing on inputs 1 and 2. When
Channels 1 & 2 are arranged in Stereo, INSERTS 1 & 2 can be used as a stereo pair for sources such as Master Bus Processing or on
Stereo sources like Drum Overheads or Keyboards.
In the Mixer page, the Insert button, available ONLY on channels 1 & 2, are seen here in the Fader Tray.
The Insert button will be greyed out until the INSERTS are configured in the settings menu and 'Use Line Output 9/10 as Insert Send 1/2
are both selected.
The Insert Buttons will now be available to select, illuminating yellow when active.
1/27/25, 9:53 AM
SSL 18 User Guide – SSL Support
https://support.solidstatelogic.com/hc/en-gb/articles/23411101112477-SSL-18-User-Guide
15/54
Bekijk gratis de handleiding van Solid State Logic SSL 18, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Solid State Logic |
| Model | SSL 18 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8982 MB |